Onlain bookmaker bet365.com - the best bokie

Servicios petroleros

Asesoria con prestigiosas empresas internacionales encargadas del suministro de equipos, accesorios y repuestos petroleros.
 
 
diseno de la planta de energia
 
 
PRODUCTION FACILITIES
 
After a well is completed, the produced fluids are separed into gas, oil and water. Special technology has been developed for separation these fluids, for overcoming associated problems: such as corrosion, hydrates, and emulsiones.
 
1.- WELLHEAD
The surface terminaton of a wellbore that incorporate facilities for installing casing hangers during the well construction.
2.- PRODUCTION MONITORING
Identify problems inthe reservoir or wellbore construction and help you improve production with targeted remedial actions.
3.-PRODUCTION LOGGING
Get production logging answers in horizontal, devioted and vertical wells, plus conclusive identification of water, oil and gas entry points.
4.- PRODUCTION TUBING
A wellbore tubular used to produce reservoir fluids.
5.- PRODUCTION CASING
A casing string that is set across the reservoir interval and within which the primary completion components are installed.
6.- PACKERS
To maximize efficiency and productibility.
7.- SEPARATOR
A cylindrical or spherical vessel used to separate oil, gas and water from the total fluid stream produced by well.
Two- phase: oil and gas
Three-phase: oil, water and gas.
8.- COMPRESSOR
 A devise that raises the pressure of air or natural gas. A compressor normally uses positive displacement to compress the gas to higher pressures so that the gas flow into pipelines and others facilities.
9.- PRODUCTIVE DRILLING
Helps you reach TD in less time- and optimize production by putting wells in the best place.
10.- COILED TUBING
Increase  production from older and marginal fields with accurately placed, low-friction, polymer-free fracturing fluids.
11.-SCALE CONTROL
Remove and prevent scale within wellbores and the reservoir.
12.- CEMENTING
Reduce costs and risk and protect the environmental with complete zonal isolation.
13.- INJECTION WELL
A well in which fluids are injected rather than produced the primary  objective typically being to maintain reservoir pressure.
14.- ARTIFICIAL LIFT
Add energy to the fluid column in a wellbore with the objective of initiating and improving production from the well.
15.- ELECTRIC SUBMERGIBLE PUMP
Electrically driven, providing flexibility over a range od sizes and output flow capacities.
16.- MULTIPHASE PUMP
A pump that can handle the complete production from a well (oil, natural gas, water and sand).
17.- INJECTION PUMP
Any pump used to inject fluid into the reservoir or production system.
18.- INJECTION PRESSURE
The pressure at which a treatment or test fluid can be injected into the formation matrix. The pressure needed to inject fluid into the formation to pressurise or displace hydrocarbons.
19.- INJECTION MANDREL
A downhole completion component that enables injection of treatment chemicals or inhibitors, into the production conduit.
20.- GATHERING LINES
The pipes used to  transport oil and gas from a field to the main pipeline. Gathering system: pumps, headers, separators. The flowline network and process facilities that transport and control  the flow of oil or gas from wells to a main storage facility.
21.- EMULSION
Treaters tanks, regulators, compressors, dehydratos, valves and associated equipment.
22.- PIPELINE
A tube or system of  tubes used for transporting oil and natural gas.
23.-PIPEOIL
line oil whose free water, sediment and emulsion (BS&W). (BS&W= Basic Sediment and Water).
24.- PIPELINE GAS
A sufficiently dry gas that will not drop out natural gas liquids (NGL) when entering the gas pipeline.

Официален блог на WebEKM EKM очаквайте сайта онлайн скоро.

Download Free Templates http://bigtheme.net/ free full Wordpress, Joomla, Mgento - premium themes.